VW Transporter Key Replacement in Bristol
Transporter HU66 key cutting, T5/T6/T6.1 programming, lost keys & fleet spares — mobile van locksmith across Bristol, Bath & South Glos.
Fast, mobile VW Transporter van key replacement with no towing and no dealer wait. Dealer-level software, roadside and on-site programming, Monday to Friday 8am–5:30pm.
4.99 Trust-a-Trader · No obligation
The VW Transporter Van Key Services We Offer
Transporter Vehicle Entry
Keys locked in the cab or load area? We open the Transporter with non-destructive tools — no drilling, no damage — and get you working again.
Vehicle entryLost Your Transporter Keys?
A T-series off the road is lost income. Lost or stolen keys? We attend the roadside, yard or depot and programme a replacement — no towing.
Lost key helpTransporter Key Programming
We cut HU66 blades and code T5, T6 and keyless T6.1 keys to your immobiliser using dealer-level VAG software.
Key programmingFleet & Spare Keys
One key across a working van is a gamble. We supply and programme spare and fleet Transporter keys at your yard, depot or site.
Spare & fleet keysRegain Entry Into Your VW Transporter
A VW Transporter off the road is money walking out the door. The T5 and T6 are the choice of trades, couriers and campervan converters across the region — so a lost, stolen or snapped key does not just cost a key, it costs the job and the day’s work.
The dealer route means recovering the van, waiting for a slot and paying for the key, the coding and the transport while your Transporter sits idle. A general locksmith cannot programme it either — the Transporter runs VAG’s immobiliser, so an uncoded key opens the door but never starts the van. And with the classic “why can’t I just get a VW key cut” question, the honest answer is that it needs the right software and blanks.
Lock City is a mobile van locksmith carrying the VAG software and HU66 blanks to cut and code a Transporter key at your yard, depot or the roadside — no towing, no dealer wait. We also handle fleet spare keys so a single failure never strands a van. Call 07967 097 899, Mon–Fri 8am–5:30pm.
VW Transporter Keys: Types & What You Need
The Transporter has run through several VAG immobiliser generations. Telling us the model (or your reg) means we arrive with the right blade, chip and software:
Transporter T5 (2003–2015)
- Blade: HU66 VAG blade in a flip (switchblade) remote on later vans, fixed-head remote or plain transponder key on earlier/base vans.
- Transponder: Megamos (ID48) on earlier vans, moving to Hitag on later T5.1 — the bread-and-butter VAG job.
Transporter T6 (2015–2019)
- Key: HU66 flip remote with a secure Hitag transponder.
- All-keys-lost: programmable with dealer-level VAG software.
Transporter T6.1 (2019–present)
- Keyless: Keyless Entry & Start (Kessy) proximity offered as an option — a more involved job than a standard flip key.
Sibling note: the Transporter shares its HU66 / VAG key platform with the VW Caddy. The VW Crafter is different — the 2017-on Crafter is a MAN TGE van, and the pre-2017 Crafter is actually a rebadged Mercedes Sprinter — so do not assume all VW vans share one key.
Note: exact chip generation and whether Kessy keyless is fitted vary by year and spec [verify against your VIN]. Give us your reg and we will confirm the key and software before we travel. See our van key programming service.
Recent VW Transporter keys we've done
Genuine jobs from our own van, not stock photos — VW Transporter keys cut and coded at the roadside across St Paul’s, Saltford, Odd Down & 6 more areas. Tap any photo to see the story.
All keys lost
Replacement
Spare key
Spare key
Replacement
Spare key
Spare key
Spare keyWhich key does a VW Transporter Van use?
Depending on the generation and trim, the VW Transporter Van is fitted with the flip (switchblade) remote key and the smart proximity (keyless) key. Tell us your registration and we will confirm which one your vehicle carries before quoting.
- Flip (switchblade) remote key
- Smart proximity (keyless) key
VW Transporter Van Key Replacement — Your Questions Answered
Why can’t I just get a VW Transporter key cut at a key bar?
Because cutting the HU66 blade is only half the job — the van’s VAG immobiliser will not start it until the key’s transponder is electronically coded to the van. That needs dealer-level software and the right blank, which a high-street cutter does not have. We do both in one visit. See our van key programming service.
Can you programme a Transporter key at the roadside or depot?
Yes. We cut and code T5, T6 and T6.1 keys on-site at your yard, depot or the roadside — no recovery to a dealer. See our van locksmith solutions.
My T6.1 has keyless entry — can you still make a key?
Yes. The T6.1’s optional Keyless Entry & Start (Kessy) system needs the right proximity fob and current software, both of which we carry. Keyless jobs take a little longer than a standard flip key, especially all-keys-lost.
I’ve lost every key to my Transporter — can you help?
Yes. All-keys-lost is a common Transporter job — we generate and code a fresh key to the van on-site, so you avoid recovery costs. See our lost keys service.
Can you key a fleet of Transporters at our yard?
Yes. We attend yards and depots to supply and programme spare and replacement Transporter keys across a fleet in one visit, so no single lost key takes a van off the road. See our replacement van keys service.
